The FX-PC Series Programmable Controller family comprises a group of versatile controllers and accessories designed to monitor and operate a wide variety of commercial HVAC equipment and other building systems.
CH-PCA2513-0
FX PC Controllers
16-Point Advanced Application Programmable Controller with 4 UI, 6 BI, 2 BO, 2 AO and 2 CO, 24 VAC, SA Bus, FC Bus, Integral Real-time Clock
Features
- Supports peer-to-peer communications
- Continuous Tuning Adaptive Control provides more efficient controls and reduces level of manual intervention
- Advanced diagnostics for failure detection, resolution and prevention
- Field Equipment Controllers have been tested by the BACnet Testing Labs (BTL) and are certified as BACnet Application Specific Controllers
- PCA models feature an integral real time clock with on-board time schedules, calendars, trends and alarms and are certified as BACnet Advanced Application Controllers (B-AAC)
Inputs4 UI + 6 BI
Outputs2 AO + 2 BO + 2 CO
Supply Voltage24 VAC
Integral DisplayNo
Communications BusBACnet MS/TP 3-wire FC Bus between the supervisory controller and field controllers; 4-wire SA Bus between field controller, network sensors, and other sensor/actuator devices, includes a lead to source 15 VDC supply power (from field controller) to bus devices.
Power Consumption14 maximum VA
Operating Ambient Conditions0°C to 50°C (32°F to 122°F); 10 to 90% RH noncondensing
ProcessorRX631 Renesas®, 32-bit microcontroller
Memory16 MB flash memory and 8 MB SDRAM
Real-Time Clock Backup Power SupplySuper capacitor maintains power to the onboard real-time clock for a minimum of 72 hours when supply power to the controller is disconnected. Enable monitoring and controlling schedules, calendars, alarms, and trends.
MountingHorizontal on single 35 mm DIN rail mount (preferred), or screw mount on flat surface with three integral mounting clips on controller
HousingABS and polycarbonate, Rating V0 minimum Protection Class: IP20 (IEC529)
Dimensions (HxWxD)150 x 164 x 48 mm (5-7/8 x 6-7/16 x 1-7/8 in.) including terminals and mounting clips
Weight0.5 kg (1.1 lb)
Compliance:- United StatesUL Listed, File E107041, CCN PAZX, UL 916, Energy Management Equipment FCC Compliant to CFR47, Part 15, Subpart B, Class A
Compliance:- CanadaUL Listed, File E107041, CCN PAZX7 CAN/CSA C22.2 No. 205, Signal Equipment Industry Canada Compliant, ICES-003
Compliance:- EuropeJohnson Controls declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive.
Compliance:- Australia and New Zealand:RCM Mark, Australia/NZ Emissions Compliant
Compliance:- BacnetBACnet Testing Laboratories™ (BTL) BACnet Advanced Application Controller (B-AAC) certification pending
Net Weight: 0.5kg
Product Dimension:Width 220 mmLength57.5 mmHeight150 mm
